AEG DVD 4552 400462 Hoja De Datos

46

Connect an AV cable to AV IN (Fig. 2/3) and to the playback device to 

 

K

view images of another playback device (such as digital camera).
Connect the AC adapter cable to the DC IN connector (Fig. 2/5).

 

K

Connect the AC adapter to a properly installed plug socket.

 

K

 

Other devices can only be connected to the LCD Monitor (slave moni-
tor).

Connect a coaxial cable (not included) to transmit the digital audit signal 
to your playback unit or your amplifier.
1.  Plug the Audio plug into the COAXIAL socket of the DVD monitor  

(Fig. 1/13).

2.  Insert the audio plug into the corresponding socket of your playback 

unit or your amplifier.

Connect an A/V cable to AV OUT (Fig. 1/14) and to the TV set to view 
images on the TV set. 
Switch the TV set to AV IN. Observe the TV’s user manual.

 

You need an audio cable with a 4-pin 3.5 mm jack plug to cinch socket, 
with a pin length of 15 mm.

Press the 

 

K

MODE button (Fig. 2/8), to display the Setup menu.

Use the 

 

K

 and   (Fig. 2/9) buttons to select the option. Use the   and 

 (Fig. 2/7) buttons to change the setting.

 

The menu hides itself automatically after a short time if no setting has 
been changed.

Picture
In the “Picture” menu, you can adjust brightness, contrast, colour, OSD 
language and the aspect ratio (ZOOM).