AEG DVD 4552 400462 Hoja De Datos

48

You transmit commands to the DVD-Player using the remote control. It is 
important that the end of the remote control is pointed toward the DVD-
Player.

1.  Slide the OPEN button on the device (Fig. 1/2) in the direction of the 

arrow. The CD/DVD compartment opens.

2.  Insert the CD/DVD.
3.  Close the CD/DVD compartment again. A moment later the loaded 

media type is displayed (e.g. “DVD-VIDEO”).

For CDs the following status information is displayed:  

K

K

Here you find information about playing time and remain-

ing time. By default the elapsed playing time of the current track is 
displayed in minutes and seconds. Repeatedly press the 

DISPLAY 

button (Fig. 3/4) on the remote control for further time displays.  
You have the following options  
- remaining time until the end of the track,
- elapsed playing time CD,
- remaining time until the end of the CD.

You may display the screen menu for DVD use by pressing the 

DISPLAY 

button (Fig. 3/4). 

K

K

K

Here you find information about playing time and remaining 

time.  
By default the elapsed playing time of the current track is displayed.  
The time is displayed in hours, minutes and seconds. Repeatedly 
press the 

DISPLAY button (Fig. 3/4) on the remote control for further 

time displays.
You have the following options
- remaining time until the end of the title, 
- elapsed playing time chapter,
- remaining time until the end of the chapter,
- display off.

1.  Insert CD/DVD into CD/DVD-compartment   Page 48, “Load CD/

2.  Press the “

” button (Fig. 3/7) on the remote control.

 

If the play does not start up or the play quality is poor, check the default 
settings on the DVD-Players.