HP Officejet 4636 e-All-in-One Printer E6G86B#BHC Manual De Usuario

1

Telephone wall jack

2

Parallel splitter

3

DSL/ADSL filter

Connect one end of the phone jack that was supplied with the printer to connect to the 1-

LINE port on the back of the printer. Connect the other end of the cord to the DSL/ADSL filter.

You might need to connect the supplied phone cord to the adapter provided for your country/

region.

4

Computer DSL/ADSL modem

5

Computer

NOTE:

You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front

and two RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel

splitter which has two RJ-11 ports on the front and a plug on the back.

Figure B-7

  Example of a parallel splitter

To set up the printer with a computer DSL/ADSL modem

1.

Obtain a DSL filter from your DSL provider.

2.

Using the phone cord provided in the box with the printer, connect one end to the DSL filter, and

then connect the other end to the port labeled 1-LINE on the back of the printer.

NOTE:

You might need to connect the supplied phone cord to the adapter provided for your

country/region.

If you do not use the supplied cord to connect from the DSL filter to the back of the printer, you

might not be able to fax successfully. This special phone cord is different from the phone cords

you might already have in your home or office.

3.

Connect the DSL filter to the parallel splitter.

4.

Connect the DSL modem to the parallel splitter.

5.

Connect the parallel splitter to the wall jack.

6.

Run a fax test.

ENWW

Set up faxing (parallel phone systems) 145