Bunn JDF-2 S, JDF-4 S, Lighted DisplayCanada Manual De Propietario

22

TROUBLESHOOTING (cont.)

Dispense station not working

All stations dispense concentrate

only

1. Dispense Lockout switch set to

OFF position.

2. Dispense switch failed

Main water supply

Frozen bath

Inlet water valve failed

Place switch in ON position.

Check switch and harness for proper

continuity.

Check for ON position.

A) Compressor relay/contacts

shorted - replace relay.

B) Recirculating pump - replace or

check for kinked flex line.

A) Check for 120V or 230V power

when dispensing. If yes, replace

valve. If no, check harness for

proper continuity. Then replace

circuit board if needed.

PROBLEM

PROBABLE CAUSE

REMEDY

44744.2 062912