Gossen Thermometer 15122 Manual De Usuario

GOSSEN Foto- und Lichtmeßtechnik

6

Press the function button for selecting the 
individual functions of the Digisix. 
Each time the button is pushed, the next 
function will be activated. 
The display panel will show the functions in 
the following sequence.:
• Exposure metering
• Timer
• Watch
• Alarm  clock
• Temperature

 

The next function will only be activated after 
the Function button has been released. 
When the Function button is kept pressed 
down for more than two seconds, the 
settings of that function are displayed and 
can be adjusted as desired.

2.1 Setting the film speed
– Select the function "Exposure" and hold 

down the function button until the 
OK-signal sounds. The display will show 
ISO, blinking, instead of EV. 

– Use the measuring key M to select the 

desired film speed. 
When holding the key M pressed down, 
the film speed will automatically be
increased. When getting close to the
desired ISO value, release the key M 
and set the desired film speed by pushing 
the key in individual steps.
Each time you push the key, the film 
speed is increased by a 1/3 stop.