Brocade Communications Systems Switch 53-1001762-01 Manual De Usuario

show mac-address-table

7

show mac-address-table

Displays a specific MAC address table static and dynamic entry or the MAC address table static and 
dynamic entries for a specific interface or VLAN.

Synopsis

show mac-address-table [address mac-addr | aging-time | count | dynamic | interface 
{tengigabitethernet slot/port | port-channel number} | linecard interface tengigabitethernet 
slot/port | static | vlan vlan_id ]

Operands

address mac-address

Specifies a 48-bit MAC address. The valid format is H.H.H (available in EXEC 
mode only).

aging-time

Displays the aging time.

count

Displays the count of forwarding entries.

dynamic     

Displays the dynamic MAC addresses.

interface   

Displays the forwarding information of an interface.

tengigabitethernet

Specifies a valid 10 Gbps Ethernet interface.

Specifies a valid slot number.

Specifies a valid port number.

port-channel number

Specifies the port-channel number. The range of valid values is 1–63.

linecard    

Displays the linecard information.

interface   

Displays the forwarding information of an interface.

tengigabitethernet

Specifies a valid 10 Gbps Ethernet interface.

Specifies a valid slot number.

Specifies a valid port number.

static      

Displays the static MAC addresses.

vlan vlan_id

Specifies the VLAN number. The range of valid values is 1-3583.

Defaults

No static addresses are configured.

Command

Modes

EXEC mode 

Description

Use this command to display a specific static or dynamic MAC address entry or all entries for a 
specific interface, a specific VLAN, a specific linecard, or for all interfaces and all VLANs.

Usage

Guidelines

There are no usage guidelines for this command.

Examples

To display a specific MAC address in the table:

switch#show mac-address-table address 0011.2222.3333