Bunn G9-2T HD DBC Manual De Propietario

5

1.  Open the top lid. Clear all foreign objects and shipping material  from the hopper compartment and the en-

trance to the grind chamber.

2.  Plug in the grinder.

3.  Fill the hopper compartments with whole bean coffee. (Capacity 6 pounds each). The grinder is now ready 

for use.

d

d

c

b

a

 

Pressing the GRIND button initiates a timed grind cycle.

 

Pressing the STOP button ends the operation of the grinder.

Pressing the ® pad allows programming access (see page 6).

 

These pads are located on the funnel depictions on each side of the grinder with a total of 6 pads.  Selecting 

one of these pads will select the amount of grind and side from which to grind.

  Example:  Selecting the lower pad on the left side will grind enough beans from the left side of the grinder 

to brew the amount programmed into grinder.

 

Pressing the ON/OFF pad alternately turns the grinder on and off.

The control board determines the amount of beans that will leave the hopper in a grind cycle. The timer por-

tion can be adjusted to dispense a different amount from each hopper and each batch size. The scale is from 0.4 

to 99.9 seconds.  Refer to the Adjustments section for timer setting chart (page 8).

e

33736  030205