Bunn VLPF Manual De Propietario

        

Page 7      

 

A troubleshooting guide is provided to suggest probable causes and remedies for the most likely problems 

encountered.  If the problem remains after exhausting the troubleshooting steps, contact the Bunn-O-Matic 

Technical Services Department.

� � Inspection, testing, and repair of electrical equipment should be performed only by qualified service person-

nel.

� � All electronic components have 120 volt ac and low voltage dc potential on their terminals.  Shorting of 

terminals or the application of external voltages may result in board failure.

� � Intermittent operation of electronic circuit boards is unlikely.  Board failure will normally be permanent.  If 

an intermittent condition is encountered, the cause will likely be a switch contact or a loose connection at a 

terminal or crimp.

� � Solenoid removal requires interrupting the water supply to the valve.  Damage may result if solenoids are 

energized for more than ten minutes without a supply of water.

� � The use of two wrenches is recommended whenever plumbing fittings are tightened or loosened.  This will 

help to avoid twists and kinks in the tubing.

� � Make certain that all plumbing connections are sealed and electrical connections tight and isolated.

� � This brewer is heated at all times unless unplugged.  Keep away from combustibles.

10179 060100