Bunn trifecta Manual De Propietario

Page 10

DAILY CLEANING

Lift handle. Remove brew chamber and cup.

Wipe down sprayhead with a soft cloth to

remove any residue. Once a month, or as

use necessitates, rotate sprayhead coun-

terclockwise and remove as illustrated.

Clean & lube guides as needed.

SPRAYHEAD REMOVAL

CHECK VALVE REMOVAL

Push the check valve up from underneath

the cup support.

Thoroughly wash sprayhead, cup and check valve (with

mild soap and water) and rinse with fresh water. Wipe

out the cap area above sprayhead and around O-rings.

Replace sprayhead by rotating clockwise, take care not

to over tighten or cross thread the sprayhead when

reinstalling.

Thoroughly flush the check valve while pushing the

center poppet open with a probe.

42822.1 110411

Clean & inspect parts daily.

Replace if loose, cracked or damaged.

STOP!

DO NOT LUBE

THIS O-RING

After cleaning, apply very light film of silicon

lube (included) to O-rings & check valve (1-4)