Brother HL-1110 Manual De Usuario
Troubleshooting and other information
46
A
Toner Setting
A
The printing operation varies depending on the machine setting:
Default setting (Stop mode)
The machine will stop printing until you replace the toner cartridge with a new one when the LEDs indicate
Replace Toner.
The machine will stop printing until you replace the toner cartridge with a new one when the LEDs indicate
Replace Toner.
Continue mode
To force the machine to continue printing after the LEDs indicate Replace Toner, press
seven times
to enter Continue mode (all the LEDs blink twice, and then the Ready LED (
) turns on). The machine
will continue printing until the LEDs indicate Toner Ended.
To return to the default setting (Stop mode), press
seven times (all the LEDs blink once).
NOTE
• Make sure that the top cover is closed before you change the mode.
• When the LEDs indicate an error mode, you cannot change the mode.
• If you continue printing in the Continue mode, we cannot guarantee the print quality.
• While using Continue mode the print may appear faint.
• When the LEDs indicate an error mode, you cannot change the mode.
• If you continue printing in the Continue mode, we cannot guarantee the print quality.
• While using Continue mode the print may appear faint.