Brother HL-1110 Manual De Usuario

Troubleshooting and other information 

The most common error and maintenance messages are shown below.
If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips:
Visit us at http://solutions.brother.com/.

The toner cartridge is not installed 
correctly.

Pull out the drum unit and toner cartridge assembly, 
take out the toner cartridge, and put it back into the 
drum unit again. Put the drum unit and toner cartridge 
assembly back in the machine. If the problem 
continues, call your Brother Customer Service.

Verify you are using a genuine 
Brother toner cartridge.

Use only a genuine Brother Original drum unit and 
genuine Brother Original toner cartridge.

The top cover is not closed 
completely.

Close the top cover of the machine.

The drum unit is near the end of its 
life.

Order a new drum unit now so a replacement drum 
unit will be available when the Status Monitor 
indicates Replace Drum. (See Drum End Soon / 
Replace Drum on LEDs (Light Emitting Diodes).)

It is time to replace the drum unit.

Replace the drum unit. 

(See the instructions that are supplied with the new 
drum unit.)

The drum unit counter was not reset 
when a new drum was installed.

Reset the drum unit counter. 

(See the instructions that are supplied with the new 
drum unit.)

The toner cartridge is at the end of 
its life. The machine will stop all print 
operations.

Replace the toner cartridge. 

(See the instructions that are supplied with the new 
toner cartridge.)

If the Status Monitor shows 
Toner Low you can still print; 
however, the machine is telling you 
that the toner cartridge is near the 
end of its life.

Order a new toner cartridge now so a replacement 
toner cartridge will be available when the 
Status Monitor shows Replace Toner.