Garmin Edge 1000 Manual De Propietario

From the home screen, select   > Activity Profiles.

Select a profile.

Select Auto Features > Auto Lap > Auto Lap Trigger > By 

Position > Lap At.

Select an option:
• Select Lap Press Only to trigger the lap counter each 

time you select 

 and each time you pass any of those 

locations again.

• Select Start and Lap to trigger the lap counter at the GPS 

location where you select   and at any location during 

the ride where you select 

.

• Select Mark and Lap to trigger the lap counter at a 

specific GPS location marked before the ride and at any 

location during the ride where you select 

.

If necessary, customize the lap data fields (

You can use Auto Lap to automatically mark the lap at a specific 

distance. This feature is helpful for comparing your performance 

over different parts of a ride (for example, every 10 miles or 40 

kilometers).

From the home screen, select   > Activity Profiles.

Select a profile.

Select Auto Features > Auto Lap > Auto Lap Trigger > By 

Distance > Lap At.

Enter a value.

If necessary, customize the lap data fields (

You can use the auto scroll feature to automatically cycle 

through all of the training data pages while the timer is running.

From the home screen, select   > Activity Profiles.

Select a profile.

Select Auto Features > Auto Scroll.

Select a display speed.

This feature automatically detects when your device has 

acquired satellites and is moving. It is a reminder to start the 

timer so you can record your ride data.

From the home screen, select   > Activity Profiles.

Select a profile.

Select Start Notice.

If necessary, select Start Notice Mode.

Select an option:
• Select Once.
• Select Repeat > Repeat Delay to change the amount of 

time to delay the reminder.

Select   > System.
• GPS Settings (

)

• Display Settings (

• Data Recording Settings (

• Unit Settings (

• Configuration Settings (

)

• Language Settings (

• Tone Settings (

)

You can turn GPS off when you are training indoors or to save 

battery life.

From the home screen, select   > System > GPS > GPS 

Mode > Off.

When GPS is off, speed and distance are not available unless 

you have an optional sensor that sends speed and distance 

data to the device (such as a speed or cadence monitor). The 

next time you turn on the device, it will search for satellite 

signals again.

If you have accurate elevation data for your present location, 

you can manually calibrate the altimeter on your device.

From the home screen, select   > System > GPS > Set 

Elevation.

Enter the elevation, and select  .

The satellite page shows your current GPS satellite information. 

.

From the home screen, select   > System > GPS > View 

Satellites.

GPS accuracy appears at the bottom of the page. The green 

bars represent the strength of each satellite signal received (the 

number of the satellite appears below each bar).

Select   > System > Display.
Auto Brightness: Automatically adjusts the backlight 

brightness based on the ambient light.

Backlight Timeout: Sets the length of time before the backlight 

turns off.

Color Mode: Sets the device to display day or night colors. You 

can select Auto to allow the device to automatically set day 

or night colors based on the time of day.

Screen Capture: Allows you to save the image on the device 

screen.

Select   > System > Data Recording.
Record To: Sets the data storage location (

Recording Interval: Controls how the device records activity 

data. Smart records key points where you change direction, 

speed, or heart rate. 1 Sec. records points every second. It 

creates a very detailed record of your activity and increases 

the size of the activity.

Data Averaging: Controls whether the device includes zero 

values for cadence and power data that occur when you are 

You can customize units of measure for distance and speed, 

elevation, temperature, weight, position format, and time format.

Select   > System > Units.

Select a measurement type.

Select a unit of measure for the setting.

From the home screen, select   > System > Tones.

From the home screen, select   > System > Language.

Customizing Your Device

13