BD Diesel Performance Water Pump 1030398 Manual De Usuario

6 December 2005 

            Torq/UnLoc #1030398 

 

11

  
If this fails to occur, check the O/D wire color and connection to that wire and that the 
wire is on the right terminal at the module.  
  
If any of the functions still fail to occur, phone our technical service department for 
further assistance.  To bypass the effects the module (if required), unplug the blue and 
yellow wires of the transmission wire and plug the transmission wires back together.  
After final wiring and testing has been done on the vehicle, secure the module to a 
harness or a bracket under dash with tie wraps.  
  
 

  

For those applications where there is no exhaust brake installed or where the 
automatic feature of the Torq/UnLoc module is not desired or cannot be installed, 
follow the same wiring instructions as in the previous pages, except ignore the 
connecting of the section of brown  wire to the “Y” wire and brake wire (#4).   Also, 
ignore the chart of where to hook up that section of Brown wire (on next page).  
  
NOTE: The Mid (White Light) position on the toggle switch now serves only as a stock 
ECM operation.  
  

BD Engine Brake, Inc. 

Plant Address: Unit A10, 33733 King Rd, Abbotsford, BC, Canada V2S 7M9 

U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295    U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295 

Phone: 604-853-6096   Fax: 604-853-8749  Internet: www.bd-power.com