Emerson Liebert iCOM Manual De Usuario

U337 Remote / Auxiliary Sensors - System Information—Read-only text describing screen 

features.
U338 Teamwork Mode—Read-only parameter describes what U2U teamwork mode the unit is 

operating in.
U339 Teamwork Aggregation Method—Read-only parameter is viewable only in Teamwork 1 and 

3 with temperature or fan control sensor set to Remote. This parameter describes if the teamwork 

control is based on the average or maximum sensor readings in the group. If programmed to Average, 

the parameter will also display how many units are calculated in the average. Only the highest sensor 

readings will be used for the averaging. 
U341 System Remote Sensor Average—Read-only parameter is viewable only in Teamwork 1 and 

3 with temperature or fan control sensor set to Remote. This parameter displays the average remote 

sensor reading of all connected sensors.
U342 System Remote Sensor Maximum—Read-only parameter is viewable only in Teamwork 1 

and 3 with temperature or fan control sensor set to Remote. This parameter displays the average 

remote sensor reading.
U344 Aux Air Weight / Temp—Read-only parameter is viewable only when the unit is connected to 

wireless sensors, the unit is in Teamwork 1 or 3, temperature or fan control sensor set to Remote to 

view this parameter and teamwork is based on Average control. This parameter displays the weight 

applied to the wireless control (left hand value) and actual wireless sensor reading (right hand value). 

The left hand value represents the amount of influence the actual wireless sensor reading (right hand 

value) has relative other remote sensors for controlling component operation. The actual wireless 

sensor reading (right hand value) is the maximum or average wireless sensor reading transmitted 

from the auxiliary proxy or Liebert SiteLink

®

.

U345 Aux Air Mode / Temp—Read-only parameter is viewable only when the unit is connected to 

wireless sensors, the unit is in Teamwork 1 or 3, temperature or the fan control sensor set to 

Remote

 

and teamwork is based on Maximum. This parameter describes how the wireless sensors are used in 

the teamwork calculation (left hand value) and what the actual wireless sensor reading (right hand 

value). Three possible statuses may be shown as the left hand value: EXCL, INCL and ONLY. EXCL 

indicates that the wireless sensor value is not used for determining the unit fan or cooling operation. 

INCL indicates the wireless sensor value is considered for controlling fan or cooling operation. ONLY 

indicates the wireless sensor value is used for determining fan or cooling operation. The actual 

wireless sensor reading (right hand value) is the maximum or average wireless sensor reading 

transmitted from the auxiliary proxy or Liebert SiteLink.
U348 System Aggregated Ctrl Temperature—Read-only parameter is control temperature for 

cooling or fan when the unit is in Teamwork 1 or 3.