Emerson Liebert iCOM Manual De Usuario

S813 IP Address—Contains the network address of the display. This address must be unique on the 

network.
S814 Netmask— Netmask is used to divide IP addresses in subnet and specify the network available 

to hosts.
S815 Gateway—Routes data and act as a proxy server or a fire wall when setting up networks.
S816 MAC—Unique hardware identifier of the Ethernet device. READ ONLY
S817 U2U Protocol—Always set to GBP.
S818 U2U Address—Unique identifier for each unit on the network. Display addresses range from 

33 to 64. Each display on the U2U network must have a different U2U address.
S819 U2U Group—Used to create zones or groups within a U2U network. Once a group number is 

selected the display will see only devices with the same group number. The group number can be 

changed to view other devices in different groups.
S821 Bootloader Variables—Indicates if there has been a change to the bootloader since it was last 

loaded, such as monitoring protocol, IP subnet setting, group or U2U number. This parameter should 

only be activated by an authorized service person.