Bunn LCR-3 HV Manual De Propietario

13

The following functions can be Password Protected. If you wish to prevent others from accessing these functions, 

enter a 4 digit code of your choice. Record your password code [_ _ _ _], as you will need it to access these 

functions in the future.

Use the (+) or (-) buttons to 

enter password.

Use the (+) or (-) buttons to 

change the password.

Select the number of products 

to be dispensed

Select the preferred units.

Select  OFF to disable the 

Refrigeration system

Select the time delay between 

automatic deicing of the 

cabinet

Select (YES) or (NO)

Use the (+) or (-) buttons to 

adjust Rinse Alarm delay.

Select (YES) to enable

Enter the access Code to view the remaining 

functions. Factory Default = 0.

Enter your own Code to prevent access to the 

remaining functions. [0 to 9999]

Used to switch from standard 3 products to 2 

products w/Autoswitching of the Left and Middle 

Bibs.

Used to select the preferred units of measurement. 

(Oz., Gal, deg F) or (mL, L, deg C)

Select OFF to temporarily override a cooling system 

fault and allow the machine to dispense coffee.

If ice builds up on the evaporator - decrease the 

delay. If the cabinet is not cold enough - increase 

the delay.

Factory Default=120 (2 hrs)[min=30, max=180]

Selecting  Yes will enable the Rinse Alarm function, 

(see Rinse Alarm)

Enter the desired time between required Rinse 

Cycles in hours. [8 to 24 hrs]

Select YES to Lockout dispensing until the Rinse 

Alarm has been cleared. Default is NO.

 

41129.1 080112

Use the (+) or (-) buttons to 

adjust the target Temp.

Use the (+) or (-) buttons to 

adjust the target Temp.

Use the (+) or (-) buttons to 

adjust the target Temp.

Sets the water Tank temperature:

(120 - 200°F) or (49 - 93°C)

Sets the hot water Ready temperature:

Typically set to the min. desired dispense temp.

Sets the Chilled cabinet target temperature:

(38 - 50°F) or (3 - 10°C)

 

If ON

If YES

If NO

to Next Page