Znyx Networks bh5700 Manual De Usuario

zconfig zre0, zre4, zre8, zre12, zre16, zre24, zre28, zre30, 

zre32, zre34, zre36, zre38, zre40, zre42 = untag1;

zconfig zre1, zre5, zre9, zre13, zre17, zre25, zre29, zre31, 
zre33, zre35, zre37, zre39, zre41, zre43 = untag2;

zconfig zre2, zre6, zre10, zre14, zre18, zre26 = untag3;

zconfig zre3, zre7, zre11, zre15, zre19, zre27 = untag4;

zconfig zre51 = untag100;

  # Recommend using vrrp_mode RAINlink_xmit_on_failover.

zl3d zhp1 zhp2 zhp3 zhp4;

  # First address is our address.  The remaining addresses

  # are handed out to the siblings on a first come first serve

  # basis in the order specified.  Each zconfig'ured interface

  # should have sibling addresses specified.

sibling_addresses: zhp0 = 100.0.0.30, 100.0.0.31 netmask 

255.0.0.0;

sibling_addresses: zhp1 = 10.0.0.30, 10.0.0.31 netmask 255.0.0.0;

sibling_addresses: zhp2 = 11.0.0.30, 11.0.0.31 netmask 255.0.0.0;

sibling_addresses: zhp3 = 12.0.0.30, 12.0.0.31 netmask 255.0.0.0;

sibling_addresses: zhp4 = 13.0.0.30, 13.0.0.31 netmask 255.0.0.0;

  # The virtual address spans the sibling group, giving hosts and 
routers

  # a single point to connect to or a single point to use as a 

router. A

  # virtual address should not be specified for the interconnect 
interface.

Ethernet Switch Blade User's Guide

release  3.2.2j

page 37