Znyx Networks bh5700 Manual De Usuario

vrrp_virtual_address: zhp1 = 10.0.0.42 netmask 255.0.0.0;

vrrp_virtual_address: zhp2 = 11.0.0.42 netmask 255.0.0.0;

vrrp_virtual_address: zhp3 = 12.0.0.42 netmask 255.0.0.0;

vrrp_virtual_address: zhp4 = 13.0.0.42 netmask 255.0.0.0;

# Port definitions

# Define to what the ports are connected. Specifications can

# by zhp or zre name. The zhp name is a shortcut to specify
the

# entire port group associated with that interface. In the end

# these definitions are on a port by port basis. Note: zhp and

# zre names cannot be mixed on the same line.

# Shelf manager ports should be defined as monitor_only.

monitor_only ports

# are used in failover calculations, but the failover mechanism
is left

# to the software running on the shelf managers cards. The use

of the

# term "crossconnect" in these HA scripts is not the same as

the use

# in ATCA shelf managers.

interconnect: zhp0;

RAINlink: zre0..19, zre24..43;

############################# Special Modes

#############################

# VRRP modes

# The block_crossconnect mode causes the equivalent of STP
blocking on the

Ethernet Switch Blade User's Guide

release 3.2.2j

page 38