Rose electronic CATx Manual De Usuario
QUICK START GUIDE
ViewLink CATX INSTALLATION AND OPERATIONS MANUAL
1
Quick Start guide
The ViewLink system consists of a transmitter unit that connects to the video,
keyboard, and mouse ports on a PC, server, or to a KVM switch and a
receiver unit connects to a keyboard, monitor, and mouse. The transmitter
and receiver units are connected together with up to 1,000 feet of standard
CATx cable. The transmitter and receiver are available for PS/2, USB, or
PS?-USB systems. This section briefly describes the installation procedures.
Refer to the following steps and diagram to install your ViewLink Catx.
keyboard, and mouse ports on a PC, server, or to a KVM switch and a
receiver unit connects to a keyboard, monitor, and mouse. The transmitter
and receiver units are connected together with up to 1,000 feet of standard
CATx cable. The transmitter and receiver are available for PS/2, USB, or
PS?-USB systems. This section briefly describes the installation procedures.
Refer to the following steps and diagram to install your ViewLink Catx.
Step #1 –Connect the Receiver unit to the keyboard, monitor, and mouse
cables on your KVM station. Connect the provided power adapter
to the Receiver unit’s power input jack.
to the Receiver unit’s power input jack.
Step #2 –Connect the Transmitter unit to the keyboard, monitor, and mouse
ports on your PC. Depending on your ViewLink CATx model,
connect it to either the PS/2 (MiniDin6) or USB ports. If you are
connecting to a KVM switch using the DB25 model, connect it to the
KVM port on the switch.
connect it to either the PS/2 (MiniDin6) or USB ports. If you are
connecting to a KVM switch using the DB25 model, connect it to the
KVM port on the switch.
Step #3 –Connect the Receiver and Transmitter units together using up to
1,000 feet of CATx cable (CAT5, 5e, or 6).
Step #4 –Apply power to the KVM monitor, the Receiver unit, and boot your
PC (turn on the KVM switch if using the DB25 model).
When you initialize the extender, it automatically senses the cable distance
between the transmitter and receiver unit, adjusts the compensation and sets
up everything for you. Refer to the manual instructions for additional
information.
between the transmitter and receiver unit, adjusts the compensation and sets
up everything for you. Refer to the manual instructions for additional
information.
Figure 1. Quick Installation Diagram
#1 Connect Receiver #2 Connect Transmitter
#3 Connect CATx Cable
#4 Apply power
#4 Apply power
KVM Station
PC
or
Switch
or
Switch