Teledyne Tablet Accessory T803 Manual De Usuario
Basic Operation
Teledyne API T803 CO2/O2 Analyzer Operation Manual
62
Table 6-5: Secondary Setup Mode Features and Functions
MODE OR FEATURE
MENU
ITEM
DESCRIPTION
MANUAL
SECTION
External Communication
Channel Configuration
Channel Configuration
COM
Used to set up and operate the analyzer’s various external
I/O channels including RS-232, RS-485, modem
communication and/or Ethernet access.
I/O channels including RS-232, RS-485, modem
communication and/or Ethernet access.
System Status Variables
VARS
Used to view various variables related to the instruments
current operational status
current operational status
Changes made to any variable will not be recorded in
the instrument’s memory until the ENTR button is
pressed.
pressed.
Pressing the EXIT button ignores the new setting.
System Diagnostic
Features
and
Analog Output
Configuration
Features
and
Analog Output
Configuration
DIAG
Used to access a variety of functions that configure, test or
diagnose problems with a variety of the analyzer’s basic
systems.
Most notably, the menus to configure the output signals
generated by the instruments Analog outputs are located
here.
diagnose problems with a variety of the analyzer’s basic
systems.
Most notably, the menus to configure the output signals
generated by the instruments Analog outputs are located
here.
Alarm Limit Configuration
1
ALRM
Used to turn the instrument’s two alarms on and off as well
as set the trigger limits for each.
as set the trigger limits for each.
1
Alarm warnings only present when optional concentration alarm relay package is installed.
07276B DCN6418