Nortel Networks Video Gaming Accessories 553-3001-211 Manual De Usuario
Page 100 of 894
Option settings
Circuit card grid
Some circuit cards contain option switches or jumpers, or both, that define
specific functions. A switch or jumper can be identified by an alphanumeric
coordinate (such as D29) that indicates a location on the card, or by a switch
number (such as SW2) printed on the circuit board (see Figure 17). Positions
on a switch (for example, positions 1, 2, 3, and 4 on SW2) are labeled on the
switch block.
specific functions. A switch or jumper can be identified by an alphanumeric
coordinate (such as D29) that indicates a location on the card, or by a switch
number (such as SW2) printed on the circuit board (see Figure 17). Positions
on a switch (for example, positions 1, 2, 3, and 4 on SW2) are labeled on the
switch block.
On a circuit card:
•
ON may be indicated by the word “on,” the word “up,” the word
“closed,” the number “1,” an arrow pointing up, or a solid dot (•).
“closed,” the number “1,” an arrow pointing up, or a solid dot (•).
•
OFF may be indicated by the word “down,” the word “open,” the number
“0,” or an arrow pointing down.
“0,” or an arrow pointing down.