National Instruments Welding System 321645c-01 Manual De Usuario
Chapter 2
Function Reference — SCAN_Setup
©
National Instruments Corporation
2-307
NI-DAQ FRM for PC Compatibles
SCAN_Setup
Format
status = SCAN_Setup (deviceNumber, numChans, chanVector, gainVector)
Purpose
Initializes circuitry for a scanned data acquisition operation. Initialization includes storing a
table of the channel sequence and gain setting for each channel to be digitized (MIO and AI
devices only).
table of the channel sequence and gain setting for each channel to be digitized (MIO and AI
devices only).
Parameters
Input
Parameter Discussion
numChans is the number of channels in the chanVector.
Range:
1 through 16.
1 through 512 for the E Series devices, AT-MIO-16F-5, AT-MIO-64F-5, and
AT-MIO-16X.
1 through n for PCI-6110E, PCI-6111E, and DSA devices, where n is the number
of physical channels onboard.
1 through 512 for the E Series devices, AT-MIO-16F-5, AT-MIO-64F-5, and
AT-MIO-16X.
1 through n for PCI-6110E, PCI-6111E, and DSA devices, where n is the number
of physical channels onboard.
chanVector is an integer array of length numChans that contains the onboard channel scan
sequence to be used. chanVector can contain any analog input channel number in any order.
For the channel number range, refer to Table B-1 in Appendix B,
sequence to be used. chanVector can contain any analog input channel number in any order.
For the channel number range, refer to Table B-1 in Appendix B,
. For example, if numChans = 4 and if
chanVector[1] = 7, the second channel to be scanned is analog input channel 7, and four
analog input channels are scanned.
analog input channels are scanned.
Note
The channels listed in the scan sequence refer to the onboard channel numbers.
If you use one or more external multiplexer devices (AMUX-64Ts), with any MIO or AI
device except the MIO-64, the total number of channels scanned equals (four-to-one
multiplexer) * (number of onboard channels scanned) * (number of external multiplexer
device except the MIO-64, the total number of channels scanned equals (four-to-one
multiplexer) * (number of onboard channels scanned) * (number of external multiplexer
Name
Type
Description
deviceNumber
i16
assigned by configuration utility
numChans
i16
number of channels
chanVector
[i16]
channel scan sequence
gainVector
[i16]
gain setting to be used for each channel in
chanVector
chanVector