Motorola PTP 400 Series Manual De Usuario

127

8.3.12 SNMP (Simple Network Management Protocol)

The industry standard remote management technique is SNMP (Simple Network

Management Protocol). The PTP 400 Series Bridge supports version 1 and version 2c of the

SNMP protocol.

8.3.12.1 Supported Management Information Bases (MIBS)

The industry standard remote management technique is SNMP (Simple Network

Management Protocol). The PTP 400 Series Bridge supports SNMP version 1 and version 2.

The PTP 400 Series Bridge SNMP stack currently supports four distinct MIBs:

1. MIB-II, RFC-1213, The PTP 400 Series Bridge supports the ‘System Group’ and

‘Interfaces Group’.

2. Bridge MIB, RFC-1493, The PTP 400 Series Bridge supports the ‘dot1dBase Group’ and

the ‘dot1dBasePortTable Group’.

3. PTP 400 Series Bridge proprietary MIB

4. WiMAX MIB

SNMP TRAPs supported:

• Cold

Start

• Link

Down

• DFS Channel Change
• DFS Impulsive Interference

For a copy of the Motorola proprietary version 1 and version 2 MIB RFCs please consult the

installation CD.

8.3.12.2 SNMP Configuration

SNMP State:

The SNMP state attribute controls the creation of the SNMP features. Changing

the SNMP state attribute requires a mandatory reboot of the unit. Only when the SNMP state

is enabled at system start-up will the SNMP processor task be created.

SNMP Enabled Traps:

The SNMP Enabled Traps attribute controls which SNMP traps the

unit will send.

SNMP Trap Version:

This determines which SNMP trap version the unit will send: version 1

or version 2c.