Motorola PTP 400 Series Manual De Usuario
128
SNMP Community String:
The SNMP community string acts like a password between the
networks SNMP management entity and the distributed SNMP clients (PTP 400 Series
Bridge). Only if the community string is configured correctly on all SNMP entities can the flow
of management information take place. By convention the default value is set to ‘public’.
When the community string is changed the system requires a mandatory reboot before the
new string or phrase is adopted.
SNMP Port Number:
The SNMP port number used by the agent for all GET, SET, WALK
PDUs.
SNMP Trap IP Address:
Is the address of either the network SNMP manager or Trap
receiver. When asynchronous events (Traps in SNMP terminology) are generated the client
unicasts these to this IP Address. When the address is changed the system requires a
mandatory reboot before the setting is adopted
SNMP Trap Port Number:
The SNMP Trap Port Number is the port number of either the
networked SNMP manager or Trap receiver. By convention the default value for the port
number is 162. When the port number is changed the system requires a mandatory reboot
before the setting is adopted.
WiMAX Control:
Enables and Disables the WiMAX (802.16) MIB. This control is only
displayed when ‘Fixed Frequency’ is selected during installation.
8.3.12.3 SMTP (Simple Mail Transport Protocol)
The SMTP client is an alternative method for the PTP 400 Series Bridge to alert the outside
world when there are or have been system errors
SMTP Email Alert:
This attribute controls the activation of the SMTP client.
SMTP Enabled Messages:
The SMTP Enabled Messages attribute controls which email
alerts the unit will send.
SMTP IP Address:
The IP address of the networked SMTP server.
SMTP Port Number:
The SMTP Port Number is the port number used by the networked
SMTP server. By convention the default value for the port number is 25.
SMTP Source Email Address:
The email address used by the PTP 400 Series Bridge to log
into the SMTP server. This must be a valid email address that will be accepted by your SMTP
Server
SMTP Destination Email Address:
The email address to which the PTP 400 Series Bridge
will send the alert messages.