Motorola PTP 400 Series Manual De Usuario

 

 

152

 

 

 

0 0.0 2.3 

10 1.7 4.0 

20 3.4 5.7 

30 5.1 7.4 

40 6.8 9.1 

50 8.5 10.8 

60 10.2 12.5 

70 11.9 14.2 

80 13.6 15.9 

90 15.3 17.6 

100 17.0 19.3 

11.3.2 Post-Power Testing 

1  Connect the RJ45 to the PIDU and apply power. The power LED should be illuminated 

continuously. If the power LED does not illuminate unplug the ODU connection from the 

PIDU and check the power LED illumination. If the power LED still does not light then 

check the power source. 

2  The Ethernet LED should be observed starting with 10 slow flashes, 30 seconds after 

powering. This confirms that the ODU has the correct power connections, if the Ethernet 

LED does not light check the wiring to pins 4 & 5 and 7 & 8. 

3  If a computer, switch or router is connected to the LAN side of the PIDU Plus then the 

Ethernet LED should flash with network activity. If the Ethernet LED does not show 

Ethernet activity then the network equipment and the Ethernet cables need to be 

checked, specifically continuity through to the ODU of pins 1 & 2 and 3 & 6.