Motorola PTP 400 Series Manual De Usuario

 

 

55

Should it be necessary to disconnect the PIDU Plus to ODU cable at the ODU this can be 

achieved by removing the weather proofing gland and depressing the RJ45 locking tab with a 

small screwdriver as shown below:  

 

Warning: Ensure that power is removed from the system at the PIDU Plus to prevent damage 

to the ODU while making or breaking the connection. 

7.7.3  Routing the Cable  

After connecting the cable to the ODU it can be routed and secured using standard cable 

routing and securing techniques. When the cable is in place it can then be cut to the desired 

length at the PIDU Plus prior to connection to the PIDU Plus. 

7.7.4  Fitting A Surge Arrestor

 

 

If you have opted to fit a Surge Arrestor, this should be installed by following the 

manufacturer’s instructions. For recommended types see Section 11 “Lightning Protection”