Lexibook SM1760 Manual De Introducción

Fixing your remote sensor and receiver

The remote sensor has a detachable cover with both a wall mount holder and a stand [12]. To fix it on a

wall, make sure the stand is not pulled out and fix the holder on a hook or nail. To fix the stand on a shelf

or table, simply pull it out and make sure it is well secured. The remote sensor should be fixed on a

smooth surface to prevent altering the range of the date transmission. To ensure a good transmission,

the remote sensor should not installed on or near a large metal surface. Before choosing the location of

the remote sensor, test that the receiver can receive the signals. It is also recommended that the remote

sensor is placed as close as possible to the receiver to eliminate any interference. The receiver also has

a wall mount holder and a stand. To place it, use the same precautions as for the remote sensor.

Backlight

The default state of the Backlight is ON. To turn the backlight on, press either Mode [1] or Snooze [5]. It

will stay on for about 10 seconds.

To disable it: at year setting mode (see section on manual clock setting), press the SNOOZE [5] key once,

press another time to switch it on again.

SM1760IM0036 GB7

English

CLOCK AND DATE SETTINGS

SM1760IM0036 GB8

RADIO CONTROL CLOCK

The SM1760 is designed to automatically synchronize its calendar clock

once it is brought within the reception range of a radio signal. There are

2 different radio signals:

- DCF77 signal, for GMT +1 (France, Spain, Italy, Germany);

- MSF signal, for GMT (UK, Ireland, Portugal).

The DCF77 signal will be received if the main unit is within 1500 km of the

Frankfurt atomic clock. Your main unit will be automatically synchronised

with the MSF signal if located within the UK radio signal range.

1. The clock automatically starts scanning the RF 433MHz signal after new batteries are inserted in the

main unit. When receiving radio signal, the Radio Tower symbol starts to blink. A complete reception

generally takes several minutes, depending on the strength of the radio signal. The scan can also be

triggered manually by holding the Min/- key [3] for 3 seconds.

2. When the reception is complete, the Radio

Tower symbol will stop blinking and remain

solid. The clock automatically scans the

time signal at 02:07 everyday to maintain

accurate timing.

3. If the clock is within the range of both the DCF77 and MSF radio signals, you can toggle between the

2 signals by sliding the DCF/MSF RCC key [10].

Notes:

• For an optimal reception, place the clock away from metal objects and electrical appliances (i.e.

television, computer, monitor, etc.) to minimize interference.

• If the user sets the time (year/month/date/hour/minute) manually, the unit will stop receiving the radio

control clock signals.

MANUAL CLOCK SETTING

Clock 1 setting

1. Press and hold mode [1] for 3 seconds to enter the clock setting mode

(the CLOCK 1 symbol will appear, and the time will flash).

2. Press Hour/+ [2] to set the hour and Minute/- [3] to set the minutes.

3. Press Snooze during the clock settings to alternate between the 12 and

24 hour display.

4. Press MODE [1] to set the date and month.

Note:

• If you do not press any key for one minute, the clock will accept the last settings

entered.

• February will have either 28 or 29 days. Your weather station will display the 29th day on bissextile

years.