Lexibook SM1760 Manual De Introducción

The icon        signals that the temperature has exceeded the preset temperature limit.

a. Press any key to stop temperature alarm.

b. If no key is pressed, the temperature alarm will automatically stop itself after one minute.

c. Once triggered, temperature alarm comes on as a distinctive sound, different to that of Alarm1 and 

    Alarm2.

Copyright © Lexibook 2006 

SM1760IM0036 GB13

English

English

Copyright © Lexibook 2006 

SM1760IM0036 GB14

This weather station is capable of detecting barometric 

pressure changes, and based on the data collected, can 

predict the weather for the next 12 to 24 hours. The 

effective range covers an area of 30 – 50km.

* The storm symbol will flash to warn of a thunderstorm.

* It is activated when pressure falls/rises and temperature plunges.

* The snow symbol will flash to warn that it might snow.

* Activated when the temperature of Channel 1 is between -1.9 °C & +2.9 °C.

* The snow symbol will appear solid when the temperature of channel 1 falls below - 1.9 °C, and it is 

   freezing.

* The remote sensor set at channel 1 displays the weather forecast icons (as well as the trend indication). 

   Please place it outdoors.

Your weather station displays the existing atmospheric pressure in hectopascal (hPa). It is commonly 

acknowledged that a value of 1015 hPa is the limit between an anticyclone (good weather > 1015 hPa) 

and a low-pressure area (bad weather < 1015 hPa).

In order to establish a comparison between pressure values, the latter are expressed in hPa at sea level, 

i.e. zero altitude.  Ambient pressure varies according to altitude (hence, the altitude at which your home 

stands is important). This is why it is possible and perfectly normal to notice a small difference between 

the pressure displayed by the MeteoClock® SM1760 unit (not corrected to the local altitude) and the 

official values broadcasted by the national weather agency. The reason being that the latter considers 

the altitude and corrects the measured pressure (to express it as if it was at sea level). 

Therefore, the digital readings shown by this unit must not be regarded as final:  What is in fact important 

in terms of weather forecast is the evolution and trend of those readings. A significant change in ambient 

pressure can be determined by an increase or a reduction of 5 hPa.

•  After having completed the settings of your weather station, please discard the readings of the weather  

  forecast for the next 12-24 hours. This will allow sufficient time for the Weather Station to operate at a          

  constant altitude and therefore result in a more accurate forecast.

• Absolute accuracy cannot be guaranteed regarding weather forecasting. The weather forecasting  

  feature is estimated to have an accuracy level of about 75% due to the varying areas the Weather  

  Station has been designed to be used in.

• If the Weather Station is moved to another location significantly higher or lower than its initial standing  

  point (e.g. from ground floor to 1st floor of a house), remove the batteries and reinsert them after about  

  30 seconds. By doing this, the Weather Station will mistakenly consider the new location as a possible  

  change in air pressure. Again, discard the weather forecasts for the next 12-24 hours as to allow time  

  for operation at a constant altitude.