Hughes HN7700S Manual De Usuario
Chapter 4 • Connecting the HN router to a transport device
16
1037753-0001 Revision A
Figure 6 is a sample illustration of the connections using a
modem transport device.
modem transport device.
Connecting the cables
to a T-1 transport device
to a T-1 transport device
To connect the T-1 transport:
1. Connect the installer PC to LAN 1 with an Ethernet cable.
2. Use an Ethernet cable connected to the T-1’s 10/100 Base T
2. Use an Ethernet cable connected to the T-1’s 10/100 Base T
port to LAN 2 of the HN router.
3. Connect the power cables.
Powering up and
observing the router
LEDs
observing the router
LEDs
Power up the remote terminal and watch the LEDs for normal
operation, as follows.
operation, as follows.
Figure 6: Connecting the cables
Note:
Ensure the modem has been configured properly prior to
connecting the cables.