Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Harbor Freight Tools
  4. 2_1/2 gal. Wet/Dry Vacuum/Blower
  5. Manual Del Producto

Harbor Freight Tools 2_1/2 gal. Wet/Dry Vacuum/Blower Manual Del Producto

Descargar
Página de 12
Page 9
For technical questions, please call 1-800-444-3353.
Item 61162 
        
SAFET
y
Op
ERA
TION
M
AINTENAN
c
E
SETU
p
User-maintenance and Storage
 procedures not specifically explained in this manual must 
be performed only by a qualified technician.
TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: 
Turn the power Switch of the appliance off and unplug the appliance from its 
electrical outlet before performing any procedure in this section.
TO pREVENT SERIOUS INJURy FROM AppLIANcE FAILURE: 
Do not use damaged equipment.  If abnormal noise or vibration 
occurs, have the problem corrected before further use.
cleaning, Maintenance, and Lubrication
1. 
BEFORE EAcH USE, inspect the 
general condition of the appliance.  Check for:
•  loose hardware, 
•  misalignment or binding of moving parts, 
•  cracked or broken parts, 
•  damaged electrical wiring, and 
•  any other condition that may 
affect its safe operation.
2. 
AFTER USE, wipe external surfaces of 
the appliance with clean cloth.  Store in an 
indoor dry area out of reach of children.
3.  All parts are permanently lubricated.  
Do not use additional lubrication.
4. 
WARNING!  If the supply cord of this 
appliance is damaged, it must be replaced 
only by a qualified service technician.
cleaning Filters
To ensure proper operation, clean the Filters regularly.  Torn Filters should be replaced:
cLOTH FILTER:
1.  Gently tap or brush dirt off outdoors.
2.  Wash Cloth Filter using mild soap and water.
3.  Rinse all soap and dust out thoroughly.
4. 
Allow the cloth Filter to dry for at 
least one day before reinstalling.
WARNING! Installing a wet Filter 
will increase the risk of electric shock 
and may damage the vacuum.
5.  Reinstall the Filter.  Make sure it covers 
the Filter Cage completely.
FOAM FILTER:
NOTIcE:  Do not wring the Foam Filter.  
Wringing the Foam Filter will tear its 
internal structure and ruin it.
1.  Gently wash Foam Filter using mild soap and water.
2.  Rinse all soap and dust out thoroughly.
3. 
Allow the Foam Filter to dry for at 
least one day before reinstalling.
WARNING! Installing a wet Filter 
will increase the risk of electric shock 
and may damage the vacuum.
4.  Reinstall the Filter.  Make sure it covers 
the Filter Cage completely.