GE Capital 24959 Manual De Usuario

8

If your product does not respond after you have 
tried all the codes for your brand, or if your brand is 
not listed, try searching for your code by following 
these steps.

1.  Manually turn on the device (TV, DVD, etc.) to 

be controlled.

2.  Press and hold the SETUP button until the red 

indicator stays on, then release the SETUP 
button.

3.  Press and quickly release the desired mode 

button (TV, DVD, etc.). The red indicator blinks 
off once.

4. Press the CHANNEL UP button repeatedly (up 

to 300 times) until the device to be controlled 
changes channel. The red indicator blinks off 
with each button press. If you accidentally 
overshoot the code required, press the 
CHANNEL DOWN button to backtrack through 
the library until the device changes channel. 
Pressing CHANNEL UP changes direction to 
forward again. 

5.  Press and release ENTER to install the code. 
 

Most users store DVD codes under DVD. Cable 
codes appear under CBL, etc. If you want to store 
a Satellite code under CBL, for example, fi rst fol-
low the procedure for Direct Code Entry and select 
CBL in Step 2 of Direct Code Entry. Then enter 
any Satellite code in Step 3 of Direct Code Entry. 
Then follow the steps above for Code Search. 

Note:  Code Search starts from the currently 
stored 4 digit number under that mode. Sometimes 
the fi rst code that “works” with your device may 
only allow limited functionality (e.g. the MENU 
button might not work). There may be a code 
that performs more functions. Continue the code 
search process until the best code is found.