GarrettCom - Garrett Communications Door 6K16 Manual De Usuario

Magnum 6K16-Series Managed Fiber Switch Installation and User Guide (04/06) 

 

48

.

.

Each 6K16-Series PM is individually described in the following sections. 

NOTE: The port #1 on the RJ-45 ports on all the modules, either  all 

RJ-45 ports or used for COMBO module is set as (=) other user ports. 

 

The Magnum 6KP6-RJMST is a combo 6 port module of RJ-45’s at 

10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual-

mode ST-type connectors and 

dual speed copper ports. The 

ST-connector functions as a 

fiber optic transceiver to 

support 100BASE-FX network 

segments. When installed in a 

Magnum 6K16-Series Managed 

Switch, the copper port 

supports the standard distance 

100m on each port and the fiber 

port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, 

i.e., typically 2km at full-duplex and 412m at half-duplex. 

Each port has an Activity (ACT) LED indicating packets being received, a 

Link (LK) LED that indicates proper connectivity with the remote device when lit, and  

FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 

10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps. 

 

 

The 6KP6-RJ10ST is a six port combo module that looks similar to 

the 100Mb combo module with the exception of 10Mb speed at the ST fiber module.  
The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network 
segments. When installed in a Magnum 6K16-Series Managed Switch, the copper port 
supports the standard distance 100m on each port and the fiber port supports fiber optic 

 

4