Ericsson Receiver RX8000 Manual De Usuario

Chapter 5 

 

 

 

The following user-editable fields are displayed on this web page: 

User-editable fields in the IP Interface Section: 

•  IP Address 1/2 – allows the user to input the relevant IP address. 

•  Subnet Mask 1/2 – allows the user to input the relevant Subnet Mask address. 

•  Default Gateway 1/2 – allows the user to input the relevant Default Gateway 

address. 

•  VLAN (Virtual Local Area Network) Tag 1/2 - allows the user to input the 

relevant VLAN Tag Value. 

•  VLAN Enable 1/2 - allows the user to enable/disable the VLAN. 

•  ICMP (Internet Control Message Protocol) Enable 1/2 – allows the user to 

enable/disable network 1/2 to ping the input (and Port 1/2). 

•  SNMP Enable – allows the user to enable/disable the SNMP facility via the input 

port. 

•  IP params to XML output – allows the user to enable/disable the sending of the 

IP parameters out as XML from the input port. 

User-editable fields in the Card Config Settings section: 

•  ARP Enable 1/2 – allows the user to enable/disable the ARP on Network 1/2. 

•  Ethernet Line Mode 1/2 – allows the user to set the Ethernet line mode for 

Network Interface 1/2. 

•  MAC Mode – allows the user to change the current MAC Mode. 

User-editable fields in the Listening Stream Section: 

•  FEC Enable – allows the user to enable/disable FEC. This facility is only 

available when FEC is licensed. 

 

EN/LZT 790 0005 R1A

 

5-20