Ericsson Receiver RX8000 Manual De Usuario

 

Chapter 5

 

•  Mcast IP Address 1/2 – allows the user to set the Multicast IP Address for the 

primary stream on Port 1/2. 

•  Source IP Address 1/2 – allows the user to set the Source IP Address for the 

primary stream on Port 1/2. 

•  UDP Port 1/2 – allows the user to set the UDP Port Address for the primary 

stream on Port 1/2. 

•  Column Port 1/2 – allows the user to set the Column Port Address for the 

primary stream on Port 1/2. 

•  Row Port 1/2 – allows the user to set the Row Port Address for the primary 

stream on Port 1/2. 

•  De-Jitter Buffer Level – allows the user to enter a value in milliseconds. 

•  Unicast Enable 1/2 – allows the user to enable Unicast for Port 1/2. 

User-editable fields in the Redundancy Config Setting: 

•  Use Input Ports – allows the user to select the appropriate input port. 

•  Auto Revert Delay – allows the user to enter a value in seconds. 

Two buttons, Clear ARP 1 and Clear ARP 2, are provided to allow the user to clear 
the ARP cache for port 1 or 2. If these are selected the following window is 
displayed: 

  

If OK is selected, the Input>I/P Input page is displayed showing that the operation 
has been successful. 

EN/LZT 790 0005 R1A

  

 

 

 

5-21