Edirol Webcam V-8 Manual De Usuario

 

You can make images switch in synchronization with the beat of music. This causes the images to switch automatically 

without your having to operate the video fader or the [TRANSFORMER] buttons.

You can specify the switching timing as a specified BPM (Beats Per Minute) or as the interval at which you press the [TAP] 

button.

Here’s how to specify a BPM (Beats Per Minute) setting at which the image will change each beat.

 

* The factory preset settings are assigned to memory number 1. For details on 

 

Input different images to bus A and bus B.

 

The current BPM is shown in the BPM display.

Decreasing the BPM value will slow down the timing at which the images change. Increasing the BPM value will speed 

up the timing at which the images will change. You can adjust the BPM in a range of 20–240.

* If you’ve selected “003: Fam

 

✽

 

” or “005: Nam

 

✽

 

” as the transition effect applied by a TRANSITION button, the FAM/

 

The [BPM SYNC] button will light, and the images will switch automatically at the specified BPM. If you want to change 

the timing at which the images switch, turn the [BPM/CONTROL] knob to adjust the BPM value.

The transition effect selected by the TRANSITION buttons will be applied when the images are switched.

BPM display

•

You can use BPM Sync to turn an effect on/off in synchronization with the beat of the music. In this case, input the same 

image to bus A and bus B, and then apply the effect. The effect will switch on/off at the timing that the image switches 

between bus A and bus B.

•

When using BPM Sync, you can make the transition effect be a cut, or make the transition occur at a multiple of the 

•

which the position of the video fader will not match the actual output. If you set the “Utility” menu item “Video Fader Mode” 

V-8_e.book 60 ページ ２００８年５月１５日　木曜日　午後１時１１分