Edirol Webcam V-8 Manual De Usuario
61
Switching Images in Synchronization with Music (BPM Sync)
(continued)
Input/output
settings
Intr
oduction
Connections
Basic operation
Switc
hing ima
g
es
Eff
ects
ects
BPM sync
External de
vices
Video fader
Appendices
Here’s how to specify the BPM by pressing the [TAP] button at the desired interval, causing the image to switch at each beat.
1
Set the [MEMORY] knob to memory number 1.
* The factory preset settings are assigned to memory number 1. For details on
2
Use the bus A and bus B INPUT SELECT buttons to select the desired input images.
Input different images to bus A and bus B.
3
Press the [BPM SYNC] button.
The [BPM SYNC] button will light, and the images will automatically switch at the BPM shown in the BPM display.
The transition effect selected by the TRANSITION buttons will be applied when the images are switched.
4
Press the [TAP] button to specify the BPM.
The current BPM is shown in the BPM display.
Repeatedly press the [TAP] button in time with the beat of the background music you’re using. The BPM indication
will change continuously according to the timing at which you press the [TAP] button. The image will switch according
to the displayed BPM.
* If you’ve selected “003: Fam
✽
” or “005: Nam
✽
” as the transition effect applied by a TRANSITION button, the FAM/
NAM cross point level (p. 37) will blink in the BPM display. To check the BPM setting, set the “Utility” menu item
“Preview Display Mode” to the “Mode3” setting, and note the settings data shown in the preview monitor (p. 26–27).
“Preview Display Mode” to the “Mode3” setting, and note the settings data shown in the preview monitor (p. 26–27).
Switching Images at the Tempo Specified by the [TAP] Button
BPM display
•
When using BPM Sync, you can make the transition effect be a cut, or make the transition occur at a multiple of the
•
which the position of the video fader will not match the actual output. If you set the “Utility” menu item “Video Fader Mode”
V-8_e.book 61 ページ ２００８年５月１５日 木曜日 午後１時１１分