Cyclades PM IPDU Manual De Usuario

 Chapter 4: Command Line Interface        

To assign outlet 4, 6, 7, and 8 to user tess, enter the following.

The buzzer command displays or changes the buzzer notification status. When set to on, a buzzer 
sounds when the current exceeds the threshold. This command is available to the admin user only.

buzzer <on|off|status>

on

 

Enables buzzer

off

 

Disables buzzer

status

 

Displays the buzzer status

To get the current status of the buzzer notification, enter the following.

To turn buzzer notification on or off, enter the following.

The current command displays the total current drawn by Cyclades PM IPDUs and the maximum 
current the unit has drawn (current peak). It may also be used to clear the saved peak current value.

pm>assign 4, 6-8 tess

4: Outlet assigned to tess.

6: Outlet assigned to tess.

7: Outlet assigned to tess.

8: Outlet assigned to tess.

pm>buzzer status

Buzzer is ON on IPDU #1

Buzzer is ON on IPDU #2

pm>buzzer on

Buzzer turned ON on IPDU #1

Buzzer turned ON on IPDU #2

pm>buzzer off

Buzzer turned OFF on IPDU #1

Buzzer turned OFF on IPDU #2