Futaba 10CAG Manual De Instrucciónes

104

HOVERING ADJUSTMENTS (HOV-THR and HOV-PIT):
+RYHULQJWKURWWOHDQGKRYHULQJSLWFKDUH¿QHWXQLQJDGMXVWPHQWVIRUWKHWKURWWOHDQGFROOHFWLYHSLWFKFXUYHVLQGLYLGXDOO\
DIIHFWLQJSHUIRUPDQFHRQO\DURXQGWKHFHQWHUSRLQWDQGRQO\LQWKHQRUPDOFRQGLWLRQ7KH\DOORZLQÀLJKWWZHDNLQJRIWKH
curves for ideal setup.

Adjustability:
‡5RWRUVSHHGFKDQJHVFDXVHGE\WHPSKXPLGLW\DOWLWXGHRURWKHUFKDQJHVLQÀ\LQJFRQGLWLRQVDUHHDVLO\DFFRPPRGDWHG
• Both adjustments may be inhibited if not desired. 
• Both adjustments may also be set to NULL, temporarily turning off the knob but maintaining the last memorized setting. 
• Adjustments may be memorized and then the knobs returned to center point to use that amount of adjustment. Allows 

easy use of the trimming knobs for multiple models. (Note that when memorization is repeated with the knob offset from 
center, the trim value accumulates.) 

• Adjustments are quickly reset to the initial value by turning the dial until the trim reads 0%, memorizing, then returning 

the knob to its center position. 

• Note that all functions, including these, assume the model hovers at half stick. 
• Available in normal (NORM

RUQRUPDOLGOHXSNORM/IDL1) condition only. 

Fine-tune hovering with the hovering 
adjustments. Remember these affect 
only the hovering (normal) condition.

Adjust throttle and collective pitch 
curves until the model hovers nicely. In 
ÀLJKWDGMXVWFROOHFWLYHSLWFKDQGWKURWWOH
curves near hover point independently 
with HOV-THR and HOV-PIT knobs. 

6WRUHQHZVHWWLQJVDIWHUÀLJKW

Open the HOV-THR function.

for 1 second.

 (If BASIC,

again.)

to HOV-THR.

Optional: change which knob adjusts 
each hovering curve. NULL locks in 
curve in last stored position.

to VR.

to desired knob and direction. 

Store the current dial settings prior to 
selecting another model.

to RATE.

for one second to store. 

or

VR(C) to center.

Close.

Open the HOV-PIT function.

to HOV-PIT.

Store the current dial settings prior to 
selecting another model.

to RATE.

for one second to store. 

or

VR(A) to center.

Close.

Where next?

THR-HOLD

: see p. 99.

Setting up the Idle-Ups: Throttle and Collective pitch Curves and Revo. Mixing 
(TH-CURVE, PIT-CURVE, REVO. MIX) for idle-ups: see p. 101.
D/R

,EXP: see p. 42.