Contec SEH-9450-LAS Manual De Usuario

1. Introduction 

 

 

 

SEH-9450-LAS 

3 

Understand the following definitions and precautions to use the product safely.

 

This document provides safety information using the following symbols to prevent accidents resulting in 
injury or death and the destruction of equipment and resources. Understand the meanings of these labels 
to operate the equipment safely.

 

DANGER

 

DANGER indicates an imminently hazardous situation which, if not 
avoided, will result in death or serious injury. 

WARNING

 

WARNING indicates a potentially hazardous situation which, if not 
avoided, could result in death or serious injury. 

CAUTION

 

CAUTION indicates a potentially hazardous situation which, if not avoided, 
may result in minor or moderate injury or in property damage. 

 

CAUTION

 

 

- 

Do not modify the product. CONTEC will bear no responsibility for problems, etc., resulting from 
modifying this product. 

- 

Do not strike or bend the board. 
Otherwise, the board may malfunction, overheat, cause a failure or breakage. 

- 

Do not touch the board’s metal plated terminals (edge connector) with your hands.

 

Otherwise, the board may malfunction, overheat, or cause a failure.    If the terminals are touched by 
someone’s hands, clean the terminals with industrial alcohol. 

- 

There are switches and jumpers on the board that need to be set in advance.    Be sure to check these 
before installing to the expansion slot. 

- 

Only set the switches and jumpers on the board to the specified settings. 
Otherwise, the board may malfunction, overheat, or cause a failure. 

 

CAUTION

 

 

- 

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type 
recommended by the manufacturer. Dispose of used batteries according to the manufacture’s 
instructions.