Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Contec
  4. SEH-9450-LAS
  5. Manual De Usuario

Contec SEH-9450-LAS Manual De Usuario

Descargar
Página de 99
2. System Reference 
 
 
 
SEH-9450-LAS 
5 
2. System Reference 
Specification 
Table 2.1. 
Functional Specifications    < 1 / 2 > 
Type Specifications 
Supported CPU 
Intel(R) Core Duo / Core
 
2 Duo (FSB 533 / 667 MHz) 
Cache 
Built in CPU 
Processor socket 
Socket M 
Memory (Option) 
Up to MAX 4G, DDR2 400 / 533 / 667, 200 pin SO-DIMM Socket X 2 *1 
Chipset 
Intel(R) 945GME+ ICH7M-DH 
BIOS 
Phoenix AwardBIOS, PnP support 
VGA 
Built in Intel 945GME,   
One Analog RGB D-Sub 15pin connector. 
One LVDS (18bit) I/F: (One box-header 30-pins and one box-header 20-pins connectors) 
One SDVO I/F (box-header 30-pins connector) *2 
Keyboard / Mouse connector 
One PS/2 keyboard/Mouse connector (Bundled the 2 in 1 cable) 
Serial I/F 
One box-header 10-pin connector (RS-232C) 
One box-header 10-pin connector (RS-232C/422/485) 
Baud rate: 115,200 - 50 bps (programmable) 
Parallel I/F 
None 
On board expansion bus 
Mini PCI bus 
LAN Port 
1000BASE-T/100BASE-TX, Intel 82573E controller, One RJ-45 connector. *3 
Wake On LAN support 
IDE I/F 
One EIDE ports, up to two IDE devices 
One box-header 40-pin connector, support Ultra DMA 33/66/100 *4 
The CF card slot and it shares with a Slave port. 
SATA I/F 
Two Serial ATA 1.0 compliant ports 
FDD I/F 
None 
Compact Flash Slot *5 
Type I/II x 1, IDE Slave Master port connection, Support booting *6 
SSD Socket 
None 
USB Port 
4ch USB2.0 compliant ports, one box-header 10-pin connector that support 2ch, 
Two USB type A connectors support 2ch. 
RAID 
RAID0, RAID1 
Audio 
AC97 CODEC., One pin-header 10-pin connector for speaker-out, line-in, 
microphone-in. 
*1  Max. available memory capacity is 3.1GB.    (ECC is not support.) 
*2  PCI-E X16 SDVO PORT can’t use at same time. 
*3  1000 BASE-T is supported with the Windows 2000 and Windows XP. 
*4  IDE port cannot support by UltraDMA66/100 mode at the time of CF card use. 
*5  This CF card slot do not have the hot-swap function.   The card cannot remove from slot and attach to slot at the 
time of a power supply ON. 
 
The card may be damaged if a power supply is turned off at the time of card access. 
*6  IDE Slave port can support one drive at the time of CF card use.