Cisco Systems 3.2 Manual De Usuario
3-10
Cisco Wireless LAN Controller Configuration Guide
OL-8335-02
Chapter 3 Configuring Ports and Interfaces
Configuring the Management, AP-Manager, Virtual, and Service-Port Interfaces
Figure 3-5
Interfaces Page
This page shows the current controller interface settings.
Step 2
If you want to modify the settings of a particular interface, click the interface’s Edit link. The Interfaces
> Edit page for that interface appears.
> Edit page for that interface appears.
Step 3
Configure the following parameters for each interface type:
Management Interface
Note
The management interface uses the controller’s factory-set distribution system MAC address.
•
VLAN identifier
Note
Enter 0 for an untagged VLAN or a non-zero value for a tagged VLAN. Cisco recommends
that only tagged VLANs be used on the controller.
that only tagged VLANs be used on the controller.
•
Fixed IP address, IP netmask, and default gateway
•
Physical port assignment
•
Primary and secondary DHCP servers
•
Access control list (ACL) setting, if required
Note
.