Cino MP3200 Manual De Usuario
Getting Started
(2) You can find a media width adjustment spacer inserted in
the media compartment groove. Push the spacer forward
and pull it out. Adjust the width adjustment spacer to fit one
of the grooves in accordance with the width of the label roll.
Grooves are available for the width from 34 to 58 mm with 3
mm per pitch.
and pull it out. Adjust the width adjustment spacer to fit one
of the grooves in accordance with the width of the label roll.
Grooves are available for the width from 34 to 58 mm with 3
mm per pitch.
MP3200 User’s Guide
Make Sure the Direction
of the Label Roll is Correct
of the Label Roll is Correct
(3) Set the label roll as shown in the following diagram.
(4) If you choose label printing by using the peeler function, the
backing material will be peeled away from the label as it is
printed. Tear the first label partially apart and thread the
label edge into the slot beneath the feed roller, keep the
backing material separated on the other side of the feed
roller. Then, close the media compartment cover. Press the
FEED button, the MP3200(BT) will forward the first label and
remain ready in the next printing position.
printed. Tear the first label partially apart and thread the
label edge into the slot beneath the feed roller, keep the
backing material separated on the other side of the feed
roller. Then, close the media compartment cover. Press the
FEED button, the MP3200(BT) will forward the first label and
remain ready in the next printing position.
Insert the Spacer
Directio
in the Correct
n
If you would like to use the peeler function, you have to
conduct length measurement firstly. Please refer to
“Conduct Length Measurement” before loading the
label roll.
conduct length measurement firstly. Please refer to
“Conduct Length Measurement” before loading the
label roll.
Media Width
Adjustment Spacer
Feed Roller
Close the Cover
8