Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario

Using the Setup Wizard for the Initial Configuration

Cisco ISA500 Series Integrated Security Appliances Administration Guide

44

 

-

DHCP Server: Allows the security appliance to act as a DHCP server and 
assigns IP addresses to all devices that are connected to the LAN. Any 
new DHCP client joining the LAN is assigned an IP address of the DHCP 
pool. 

-

DHCP Relay: Allows the security appliance to use a DHCP Relay. If you 
choose DHCP Relay, enter the IP address of the remote DHCP server in 
the Relay IP field. 

If you choose DHCP Server as the DHCP mode, enter the following information: 

•

Start IP: Enter the starting IP address of the DHCP pool. 

•

End IP: Enter the ending IP address of the DHCP pool. 

NOTE: The Start IP address and End IP address should be in the same 
subnet as the LAN IP address.

•

Lease Time: Enter the maximum connection time that a dynamic IP address 
is “leased” to a network user. When the time elapses, the user is 
automatically renewed the dynamic IP address. 

•

DNS1: Enter the IP address of the primary DNS server. 

•

DNS2: Optionally, enter the IP address of the secondary DNS server. 

•

WINS1: Optionally, enter the IP address of the primary WINS server.

•

WINS2: Optionally, enter the IP address of the secondary WINS server. 

•

Domain Name: Optionally, enter the domain name for the default LAN.

•

Default Gateway: Enter the IP address of default gateway. 

After you are finished, click Next. 

If you have not configured a DMZ port, proceed to 

. If you configured a DMZ port, use the DMZ Configuration page 

to configure a DMZ network. 

•

IP Address: Enter the subnet IP address for the DMZ. 

•

Netmask: Enter the subnet mask for the DMZ.