Casio CasioIsa 550 With Wifi 3y Security ISA550WBUN3K9 Manual De Usuario

Using the Setup Wizard for the Initial Configuration

Cisco ISA500 Series Integrated Security Appliances Administration Guide

45

 

•

DHCP Mode: Choose one of the following DHCP modes:

-

Disable: Choose this option if the computers on the DMZ are configured 
with static IP addresses or are configured to use another DHCP server. 

-

DHCP Server: Allows the security appliance to act as a DHCP server and 
assigns IP addresses to all devices that are connected to the DMZ. Any 
new DHCP client joining the DMZ is assigned an IP address of the DHCP 
pool. 

-

DHCP Relay: Allows the security appliance to use a DHCP Relay. If you 
choose DHCP Relay, enter the IP address of the remote DHCP server in 
the Relay IP field. 

If you choose DHCP Server as the DHCP mode, enter the following information: 

•

Start IP: Enter the starting IP address of the DHCP pool. 

•

End IP: Enter the ending IP address of the DHCP pool. 

NOTE: The Start IP address and End IP address should be in the same 
subnet with the DMZ IP address.

•

Lease Time: Enter the maximum connection time that a dynamic IP address 
is “leased” to a network user. When the time elapses, the user is 
automatically renewed the dynamic IP address. 

•

DNS1: Enter the IP address of the primary DNS server. 

•

DNS2: Optionally, enter the IP address of the secondary DNS server. 

•

WINS1: Optionally, enter the IP address of the primary WINS server.

•

WINS2: Optionally, enter the IP address of the secondary WINS server. 

•

Domain Name: Optionally, enter the domain name for the DMZ.

•

Default Gateway: Enter the IP address of default gateway. 

After you are finished, click Next. 

Use the DMZ Service page to configure the DMZ services. 

Click Add to create a DMZ service. 

Other options: To edit an entry, click the Edit (pencil) icon. To delete an entry, click 
the Delete (x) icon. To delete multiple entries, check them and click Delete.