Carrier Access Network Device Axxius 800 Manual De Usuario
5-8
Axxius 800 - Release 2.2
CLI Commands
add
add (router) dhcp server option
Use the add (router) dhcp server option command to add optional DHCP server
attributes that will be advertised every time a DHCP client discovery is initiated. This
provisioning takes effect immediately and can only be performed when the DHCP
server is enabled.
attributes that will be advertised every time a DHCP client discovery is initiated. This
provisioning takes effect immediately and can only be performed when the DHCP
server is enabled.
Syntax:
add {rtr_card-addr} dhcp server option {tag} {setting}
Example:
add 2 dhcp server option 19 false
add 2 dhcp server option 13 byte1 200
add 2 dhcp server option 160 byte2 3200
add 2 dhcp server option 170 byte4 0xFEDCBA98
add 2 dhcp server option 12 "www.carrieraccess.com"
add 2 dhcp server option 150 192.168.0.33
add 2 dhcp server option 150 192.168.0.33 10.40.1.1
20.0.0.1 100.150.3.97
{rtr_card-addr} -
The slot number (1-8) that contains the Router (TSR) card.
{tag} -
Range is 1-254. Options tags are unique, duplicate numbers will be rejected. To
change an option with the same tag, the old option must be deleted and then the new
option re-entered. 0 = off. Reserved numbers 6, 15, 44, 46, 47, 50, 51, 53, 54, 61.
option re-entered. 0 = off. Reserved numbers 6, 15, 44, 46, 47, 50, 51, 53, 54, 61.
{settings}
{true/false}
Boolean uses true or false
{byte1|byte2|byte4} {value}
byte1 = send value in 1 byte
byte2 = send value in 2 bytes
byte3 = send value in 4 bytes
value = any numeric value.
byte2 = send value in 2 bytes
byte3 = send value in 4 bytes
value = any numeric value.
{"string"}
Unidentified with a maximum of 50
characters, enclosed in quotes.
characters, enclosed in quotes.
{ip-addr} [ip-addr] [ip-addr]
[ip-addr]
[ip-addr]
IP address in the form xxx.xxx.xxx.xxx,
where xxx is a number from 0 to 255.
where xxx is a number from 0 to 255.