Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Carrier Access
  4. Network Device Axxius 800
  5. Manual De Usuario

Carrier Access Network Device Axxius 800 Manual De Usuario

Descargar
Página de 568
Axxius 800 - Release 2.2
5-9
CLI Commands
add
add (router) dns proxy
Use the add (router) dns proxy command to enable DNS proxy and add a remote DNS server 
address to the specified Router card.
Syntax:
add {rtr_card-addr} dns proxy {"domain-name"}
{ip-addr} {"profile-name"} 
Example:
add 2 dns proxy "Domain1" 192.168.100.245 "Texas"
Example will add a DNS proxy server "Domain1" with address 
192.168.100.245 to the WAN named "Texas" on the TSR in slot 2.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{"domain-name"}
The domain name for the external DNS server. Name must be enclosed in quotes, with a 
maximum length of 42 characters.
{ip-addr}
The IP address of the external DNS server, in the form of xxx.xxx.xxx.xxx, where xxx is 
between 0-255.
{"profile-name"}
The profile name for the Router interface that is used to reach this destination. Name must 
be enclosed in quotes, with a maximum length of 11 characters. 
add (router) remote 
Use the add (router) remote command to add a remote WAN profile to the WAN profile table 
on the specified Router card. 
Syntax:
add {rtr_card-addr} remote {"profile-name"} 
Example:
add 6 remote "Texas" 
The example will add a remote WAN named "Texas" to the WAN profile table 
for the TSR in slot 6. 
{rtr_card-addr}
The slot number (1-8) of the Axxius chassis that contains the Router card.
{"profile-name"} 
The name of the remote WAN profile to add with a maximum length of 11 characters. This 
name must be enclosed in quotes.