Carrier Access Network Device Axxius 800 Manual De Usuario
5-22
Axxius 800 - Release 2.2
CLI Commands
add
add (router-lan) static mac address
Use the add (router-lan) static mac address command to add a static MAC address to the
table of learned addresses on the specified LAN interface. This command is typically used
in bridging.
table of learned addresses on the specified LAN interface. This command is typically used
in bridging.
Syntax:
add {rtr_lan-addr} static mac address
{"network-name"} {mac-addr}
Example:
add 3:1 static mac address "JDoe" 0x00e09700e9cd
The example will add a static MAC address, 00:e0:97:00:e9:cd named "JDoe",
to the tables for the LAN interface on the TSR card in slot 3.
to the tables for the LAN interface on the TSR card in slot 3.
{rtr_lan-addr}
The Router address is in the form {slot:port} or {slot "profile-name"}.
{"network-name"}
A symbolic name given to identify this static MAC address. This name must be enclosed
in quotes, with a maximum of 7 characters.
in quotes, with a maximum of 7 characters.
{mac-addr}
The MAC address to add to the learned address table for the LAN, in the form a 6-octet
HEX value separated by colons, 0xxxxxxxxxxxxx. This number must be preceeded by 0x.
HEX value separated by colons, 0xxxxxxxxxxxxx. This number must be preceeded by 0x.
slot
Slot number (1-8) that contains the Router card.
port
Port number of the Router.
"profile-name"
The profile name for the Router interface. Name must be enclosed
in quotes, with a maximum length of 11 characters.
in quotes, with a maximum length of 11 characters.