Carrier Access Network Device Axxius 800 Manual De Usuario
5-24
Axxius 800 - Release 2.2
CLI Commands
add
{service}
{dest-ip-addr/bits}
The destination IP Address and number of significant bits. The IP Address is in the form of
xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0/0" matches any
address.
xxx.xxx.xxx.xxx, where xxx is between 0-255. The address "0.0.0.0/0" matches any
address.
finger
Display information about users
ftp
File Transfer Protocol
gopher
Document search and retrieval
http
World Wide Web
icmp
Internet Control Message Protocol
nntp
Network News Transfer
ping
ICMP echo request/reply
pop3
Post Office Protocol Version 3
smtp
Simple Mail Transfer
snmp
Simple Network Management Protocol
tcp
Transmission Control Protocol
port number (0 - 65535) or range
telnet
User interface to remote unit
udp
User Datagram Protocol
port number (0 - 65535) or range
wais
Wide Area Information Services
protocol
Enter a protocol number. Note: for list of protocols and numbers see,
Protocol Number in Firewall Filters on page D-2.
{protocol-number}= number between 0-255 0 = any protocol
Protocol Number in Firewall Filters on page D-2.
{protocol-number}= number between 0-255 0 = any protocol
dest-ip-addr
Enter the IP Address of the local device or network that this rule will
affect. If you enter the address of a local device, this rule will affect
only the session establishments of the local device and the
destination address entered in the Remote IP Address/Network field,
below. The IP Address is in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.
affect. If you enter the address of a local device, this rule will affect
only the session establishments of the local device and the
destination address entered in the Remote IP Address/Network field,
below. The IP Address is in the form of xxx.xxx.xxx.xxx, where xxx
is between 0-255.
bits
Use this field to identify the number of bits, from left to right that
will be used to match the IP Address field within the data packet.
Range is between 1-32.
will be used to match the IP Address field within the data packet.
Range is between 1-32.