Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Carrier Access
  4. Network Device Axxius 800
  5. Manual De Usuario

Carrier Access Network Device Axxius 800 Manual De Usuario

Descargar
Página de 568
5-58
Axxius 800 - Release 2.2
CLI Commands
disconnect
delete user
The delete user command will remover a user created by the add user command. 
Syntax:
delete user
 {"user-name"} 
Example:
delete user "jsmith"
{"user-name"}
The user-name is an existing user ID in the system. This name must be enclosed in quotes.
disconnect
disconnect
Remove a connection created using the connect command. 
Syntax:
disconnect 
{slot|slot:port|slot:port:channel|slot:port:trunk}
Example:
disconnect A:2:1-24 3:1
Disconnects all 24 channels on port address #2 (DS1) on the controller card (slot 
A) to port address #1 V.35 in slot 3.
NOTE:  
The operator can remove connections for all of a
 
slot
 
{slot}, a port 
within a slot {slot:port}, or for specific channel {slot:port:channel}
{slot|slot:port|slot:port:channel|slot:port:trunk} 
slot
A for the controller card, or 1-8 for service cards.
port
Port number or range.
channel
Channel number or range, for T1 ports.
trunk
Trunk number for this port, 1-24.