Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Carrier Access
  4. Network Device Axxius 800
  5. Manual De Usuario

Carrier Access Network Device Axxius 800 Manual De Usuario

Descargar
Página de 568
5-112
Axxius 800 - Release 2.2
CLI Commands
set
set (router) login prompt
Use the set (router) login prompt command to enable/disable the login prompt on the 
specified Router card.
Syntax:
set {rtr_card-addr} login prompt {disable|enable}
Example:
set 1 login prompt enable
The example will set the Router card to require a login with Telnets from the 
Controller.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{controller|local|radius} 
set (router) ntp 
Use the set (router) ntp command to setup Network Time Protocol (NTP) parameters. 
Note: not operational in this release.
set (router) ntp enable/disable
Use the set (router) ntp enable/disable command to enable/disable NTP processing.
Syntax:
set {rtr_card-addr} ntp {disable|enable}
Example:
set 1 ntp enable
The example will enable NTP processing on the Router card in slot 1.
{rtr_card-addr}
The slot number (1-8) that contains the Router card.
{disable|enable}
disable
Disable the login prompt
enable
Enable the login prompt
disable
Disable NTP processing
enable
Enable NTP processing